Optamate
Robopac

RT AUTOMATIC™ Automatic Stretch Wrapper

At 30–35 LPH, this low- to medium-volume, made-in-the-USA automatic stretch wrapper sets the standard for speed and efficiency in its category, as well as for safety. Keeping customers safe is priority one at Robopac: Category 3 level safety is included, and Category 3 is designed so that a single fault in any of its parts does not lead to the loss of a safety function.

Automatic Stretch Wrapper
87752168

For the ultimate standard in safety, Rolling Safety Doors™ keep the operator safe by completely closing off entrance to the wrapping area on both sides of the load. This prevents the operator from accidentally entering the wrap zone, which can cause serious injury. Safety Guard™ detects any obstruction at the bottom of the Rolling Safety Doors that may keep the doors from completely closing. This prevents the wrap cycle from initiating, which ensures supreme safety performance. This safety platform replaces costly fencing, which also saves valuable space within a facility.

With one of the smallest footprints in its category at 123" deep × 198" wide (169 sq. ft.), the RT Automatic saves valuable floor space for the food, beverage, and other industries where floor space is extremely valuable. With 250% standard pre-stretch included, the RT Automatic guarantees that stretch film will go further, which saves money. Depending upon the operation’s throughput, an ROI can be calculated demonstrating film savings and the payback period for the machine.

For those who are taking the next step into automation, the RT Automatic will enable users to wrap faster while using less space and film while keeping their operators safe, all of which equates to superior performance.

Features & Capabilities

  • Single Motor Stretch Carriage0–400% (250% standard), S thread.
  • Cut and Swipe SystemPresses film onto the load (no welding system).
  • ClampPincher style, fixed position.
  • Control PanelAllen-Bradley PanelView 7 6" HMI; CompactLogix PLC; PowerFlex drives.

Talk to an engineer.

They’ll help you spec the right solution.