Optamate
Optamate

CPS55 55kg Cobot Palletizer

With more than 16,000 units sold globally, this collaborative robot palletizer is reliable, industry tested, and built to quality standards. Current customers include General Mills, Nestlé, PepsiCo, Kraft Heinz, Hershey, Unilever, and Huawei.

Access with an Optamate account
55kg Cobot Palletizer
59808071

Swap pallets without stopping

With two pallet stations, an operator can remove a completed pallet while the robot continues palletizing on the other station with no interruption.

Fencing and light curtains included

The cell comes with floor-mounted mechanical fencing, with light curtains on the open side.

No teach pendant needed

Stop, error reset, start and emergency stop buttons on the front of the unit, plus status lights for each pallet station, let operators run the system without ever touching a robot teach pendant.

Built for 24/7 production

The cobots are rated at 30,000 hours mean time between failures (MTBF), so they are built to last many years running 24/7/365 production.

The CPS55 is a complete, standardized turnkey palletizing station that pairs a 55 kg, 5-axis collaborative robot with mechanical fencing and light curtains, palletizing software and a 15-inch touchscreen HMI. It handles payloads up to 55 kg (121 lb), operates at speeds up to 10 PPM, and stacks up to 90 inches high.

The mobile steel base features side-access slots for a forklift or pallet jack, adjustable leveling feet, and a fully integrated electrical panel. Front-mounted operator controls include emergency-stop, start, pause, and stop push buttons. Two pallet stations feature dual indicator lights and audible alarms to signal when a pallet is complete.

Optional add-ons include an infeed conveyor, a range of end-of-arm tooling (EOAT), and a slip-sheet rack.

Features & Capabilities

  • Optamate 55P Collaborative RobotA 55 kg payload, 5-axis collaborative robot.
  • Two Palletizing ZonesA pallet position on each side of the robot, so an operator can swap a full pallet while the robot keeps building on the other.
  • 15" Touch Screen HMINew pallet patterns can be created in minutes using the integrated touch screen and software.
  • Product Presence SensorDetects when a case is in position and ready to pick.
  • Pneumatic or Electric GripperChoose a pneumatic gripper, which needs compressed air, or an electric gripper.
  • Mechanical Hard FencingEnables full production speed, up to 10 PPM. Mounted to the floor. Includes light curtains.
  • Infeed Skewed Conveyor (Option)Skewed rollers align each case against one side of the conveyor, giving the robot a consistent pick position.
  • Rigid Slipsheet Management (Option)Rigid slipsheet rack and software. Cannot use flexible paper sheets. Requires conveyor purchase.
No programming or technical skills
StackPilot

No programming or technical skills

StackPilot is the simple, easy to use, onboard palletizing software included with all CPS units. Setup takes five steps: name the program, define the pallet dimensions, case dimensions/weight, build the pattern, and configure the stack (layers and slipsheet placements).

Full production speed with included fencing
Mechanical Hard Fencing

Full production speed with included fencing

Mechanical hard fencing lets the cobot run at full production speed instead of collaborative speed and palletize higher. The CPS55 comes with it, palletizes at up to 10 PPM and stacks up to 90 in. The fencing is bolted to the floor in place. Light Curtains protect the open zones (red lines).

Vacuum Cup Gripper
End-of-Arm-Tool (EOAT)

Vacuum Cup Gripper

The standard gripper has one vacuum zone with check valves across the cups, mounted in an array on an aluminum frame. Picks multiple box sizes without adjustments. Default tool is 14" x 12" and weighs 11 lbs. Slipsheet option includes "pick complete" plunger switch. Other tool options also available.

Automate placing sheets between layers
Slipsheet Rack

Automate placing sheets between layers

Can only be used for RIGID CORRUGATE type sheets (can be very thin). This options requires the purchase of infeed conveyor. Slip sheet holding rack is attached to the end. Fencing size must be increased to keep rack inside zone. Additional sheet empty photo eye sensor is added.

Talk to an engineer.

They’ll help you spec the right solution.