The best warranties in the industry
4-year unlimited cycle warranty, lifetime warranty on pre-stretch rollers and 10 years on the steel structure and ring gear.
This partially-automatic rotary tower is the ideal stretch wrapping solution for unique needs.

4-year unlimited cycle warranty, lifetime warranty on pre-stretch rollers and 10 years on the steel structure and ring gear.
With very low wrap possibility, the product is properly secured to the pallet, resulting in a pallet that is more stable for transport and therefore less damage.
Automatically cuts and wipes the film onto the load upon cycle end. A vertical roller positions the film over the clamp, which grabs the film, ensuring longer heat wire life expectancy. The heat wire then swings in and cuts the film. A timed impulse heat control allows quick cool down, so the heat wire becomes cold to the touch within 5 seconds.
| Production speed | 50 loads per hour |
|---|---|
| Maximum load weight | Unlimited |
| Maximum load height | 80″ standard; up to 116″ available |
| Machine Dimensions | 141.5" L x 130" W x 117.5" H |
| Maximum Load Size | 56" L x 56" W |
| Approximate Shipping Weight | 2800 lbs |
| Electrical Requirements | 120 V / 1 ph / 60 Hz, 15 A |
| Air Requirements | 3 cfm @ 80 psi |
| PLC | Allen Bradley Micro800 series |
|---|---|
| Control system | 24V |
| Overload protection | Current overload protection |
| Control cabinet | NEMA 4/12 (can be located up to 10' from machine frame) |
| Height sensing | Autoheight sensing photoeye |
| Power | On/off switch and status light |
| Start/stop | Push button |
| Emergency stop | Large, push/pull type |
| Carriage up/down | Manual function |
| Rotary arm speed | Variable (12 RPM) |
| Carriage speeds | Separate up and down |
| Wrap selectors | Separate top and bottom |
| Rotation control | Reinforced wrap/manual |
| Arm alignment | Positive, controlled by proximity sensor |
| Top cover pause switch | Splash proof program |
| Spiral switch | Spiral up or spiral up/down |
| Film force control | Film force to load control |
| Emergency stop | Sensor for arm path obstruction |
| Mode switch | Manual or automatic |
| Pull cord | With 40' of cable (to be installed by customer) |
| Separate station | On front of tower, with clamp jog and an additional e-stop |
| Alarm | Lack of film alarm |
| Construction | Heavy-duty structural steel |
|---|---|
| Legs | Free standing integrated leg design |
| Floor mounting legs | Four (4), 6" x 6" |
| Access | Easy access to all components |
| Concrete anchoring | Wulftec recommends heavy-duty expansion shields of 3/4" diameter thread size with a minimum anchor depth of 4" in concrete |
|---|
| Carriage | 20" NO-THREAD® Powered Pre-Stretch |
|---|---|
| Motor | 1 HP AC motor with Allen Bradley variable frequency drive |
| Pre-stretch rollers’ blue compound | Lifetime warranty |
| Film force release | For easy pull at start and end of cycle |
| Pre-stretch ratio | 50% to 300% (preset to customer spec, standard 200%; capability up to 400% depending on film type) |
| Film tension control | Electronic, with analog sensor |
| Roller cover | Lexan, for operator safety |
| Carriage angle | Angled to wrap approximately 2" from floor level |
| Carriage gate sensor | Proximity sensor to ensure the gate is properly closed |
| Motor | 1 HP AC motor with Allen Bradley variable frequency drive |
|---|---|
| Lifting chains | Two #50 carriage lifting chains |
| Carriage glides | Dual 1/2" CRS ways with UHMW-PE carriage glides |
| Supporting boom | Dual structural steel |
| Wire guide | Power track for efficient guiding of wires |
| Cut, clamp & wipe | Automated Cut/Clamp & Wipe system |
|---|---|
| Cutter | Pulse controlled cutter |
| Film alignment and tail treatment | Film alignment arm & brush on film tail treatment |
| Drive | Heavy-duty 25" ring gear with pinion gear drive |
|---|---|
| Motor | 1 HP AC motor with Allen Bradley variable frequency drive |
| Arm speed | 0-12 RPM variable speed |
| Soft start/stop | Electronic |
| Arm alignment | Positive, controlled by proximity sensor |
| Ring gear guard | Protection guard over the ring gear |
7 files · access with an Optamate account




Machines that form, pack and seal corrugated shipping cases and trays: case erectors, case and tray packers, case sealers and tray formers.




Robotic, cobot and conventional palletizers, depalletizers and pallet-handling equipment for cases, bags, bundles and containers.




L-bar, side and sleeve sealers, sealer-tunnel systems, shrink tunnels and shrink bundlers for single items, multipacks and trays.




Conveyors, accumulation tables and feeders that move containers, products, cases and pallets through a packaging line.